Valley Design Corp., an ISO 9002 certified company, announces a breakthrough in large geometry Ceramic substrate manufacturing and now has as fired 200 mm diameter, 0.060"thick 99.6% tape cast substrates available for immediate delivery in prototype quantities. These large substrates can be manufactured in thicknesses from 0.010" to 0.080" thick.
For critical applications where superior surface finish is needed, these same Ceramic substrates can be polished to better than 1 microinch and as thin as 0.005 inches.
Typical applications are for thin film circuits and some new uses like dielectric material in electrostatic wafer chucks.
Valley Design products conform to tight dimensional tolerances and specifications as well as rigorous quality standards.
Return to Home Page Optical polishing, lapping, dicing and optical components polishing
Updated: 27 September 2008
|
Advanced Search |
Sales and Customer Service |
Site Map |
Corporate Headquarters |
|
Valley Design Corp. - West 151-D Harvey West Blvd. Santa Cruz, CA 95060 |
Affiliate Sites |
Valley Design Corp. - East Two Shaker Road, Bldg. E-001 Shirley, MA 01464 |
|
West E-mail:
west@valleydesign.com Germany Sales: germany@valleydesign.com France Sales: france@valleydesign.com Phone: 831.420.0595 Fax: 831.420.0592 |
East E-mail:
east@valleydesign.com Germany Sales: germany@valleydesign.com France Sales: france@valleydesign.com Phone: 978.425.3030 Fax: 978.425.3031 |
| Return to top of page |
|
|
| © 2010 Valley Design Corp. All Rights Reserved | ||