Conductive Anti-Reflective BBAR Coated Glass

Antireflection or anti-reflective (AR) coatings reduce reflection on optical devices while the high conductivity < 400 ohms allows for extremely-low-frequency to very-low-frequency (ELF/VLF) field suppression. Resistance uniformity > 90%.

ISO specified Durability of the Antireflection Coatings on AR Coated Glass:

Humidity: No deteriation after exposure to a humidity test at a temperature of 58°C and 95% relative humidity.
Abrasion Resistance: No damage after 200 rub test with cheesecloth.
Corrosion Resistance: No deteriation after exposure to a 24 hour salt fog test.
Coating Adhesion: No damage after snap test of firmly placed tape.

Technical data on this BBAR, high efficiency BroadBand Anti-Reflective glass characterized by low reflectivity over broad band of visible wavelength of light:

AR Coated Glass Transmission (T) and Reflectivity (R)

1.9 mm double sided coating	T > 92%	R < 0.5%
3.0 mm double sided coating	T = 92%	R < 0.5%

Return to Home Page Optical polishing, lapping, dicing and optical components polishing

Updated: 27 September 2008

REQUEST A QUOTE

VALLEY DESIGN NEWS

CONVERSION CALCULATOR

Advanced Search
Powered by KSearch 1.5b

Valley Design East
Two Shaker Road, Bldg. E-001
Shirley, MA 01464
Phone: 978.425.3030
Fax: 978.425.3031

Site Map | Affiliate Sites

E-mail:		info@valleydesign.com
Germany Sales:		germany@valleydesign.com
France Sales:		france@valleydesign.com

Valley Design West
Santa Cruz, CA 95060
Phone: 831.420.0595
Fax: 831.420.0592

Return to top of page
© 2012 Valley Design Corp. All Rights Reserved