From prototype R&D through to high volume production, Valley provides custom dicing, slicing and cutting services. The dicing saws are fully programmable, and are equipped with microscope and video for precision alignment. Over the past 30 years, Valley has routinely processed customer or Valley supplied materials up to 8" diameter, and even larger by special request. Valley dices not only standard types of materials, but will also develop dicing/cutting procedures for untried materials. Materials diced include all types of Glass, Fused Silica, Crystals, Quartz, Aluminas, Silicon, Aluminum Nitride, LiN, Ferrites, Ceramics and delicate compound semiconductors such as GaN and InP. Depending upon the material, kerf may be as small as 20 microns, and dies may be diced as small as .005" (125 microns). Valley has extensive experience in dicing patterned wafers, circuited substrates, patterned optics, optically coated wafers, slotted heat sinks, step and repeat patterns, slots/steps and v-grooves. For a complete summary of Valley Design's capabilities, please visit www.valleydesign.com
Return to Home Page Optical polishing, lapping, dicing and optical components polishing
Updated: 27 September 2008
|
Advanced Search |
Sales and Customer Service |
Site Map |
Corporate Headquarters |
|
Valley Design Corp. - West 151-D Harvey West Blvd. Santa Cruz, CA 95060 |
Affiliate Sites |
Valley Design Corp. - East Two Shaker Road, Bldg. E-001 Shirley, MA 01464 |
|
West E-mail:
west@valleydesign.com Germany Sales: germany@valleydesign.com France Sales: france@valleydesign.com Phone: 831.420.0595 Fax: 831.420.0592 |
East E-mail:
east@valleydesign.com Germany Sales: germany@valleydesign.com France Sales: france@valleydesign.com Phone: 978.425.3030 Fax: 978.425.3031 |
| Return to top of page |
|
|
| © 2010 Valley Design Corp. All Rights Reserved | ||